Pendant lighting has gained a great deal of popularity for use in kitchens over the last few years. A coarse place to install them is over an island or peninsula. One of the most frequent questions I see is how high do I hang them and how do I space them out? Both questions can be answered in any ways and as with any home originate aspect there is no absolute or right answer. There is however some guidelines to use that can help you make the right decision.
One consideration on the height is with the fixture you choose. If a fixture has an open bottom and it is installed to high, it can come to be very annoying looking up into the light bulb all the time. By the same token, a fixture that is designed so that the top is not made to be viewed, if installed too low, can be very unappealing. There is an mean height you can use as a guide, about 68" - 72" off the floor to the very bottom of the fixture. This puts the fixture at about eye level for the mean person. The conjecture there is no definite reply is in a house where everybody is 6' 4" and taller this height would most likely be too low.
Us Open 2010
Over a dining room table this same rule can be applied. A diminutive tip or word to the wise. If your fixture is going to be installed before there is really a table under it put something there in its place. It could be a large box, bench, folding table or a chair. It will save person a trip to the hospital for stitches after walking into the fixture or a broken fixture.
Spacing the pendants when there is more than one is a matter of a diminutive mathematics. The most coarse mistake is to just split the space into even sections but that is not entirely definite and I'll explain why. Let's say your island is 60" long and you have two pendants. A coarse plan would be to split the space into three sections that are even. This would give you each fixture 20" off the ends and 20" in the middle of them. A best choice would be 15" off each end and 30" in the middle of them. Why is that you ask? Well for one thing you'll see it is more visually appealing. The other conjecture is the light spread on most pendants is in the shape of a circle. If you can dream the actual light that falls on the counter area photo two circles of light. To best illuminate the counter we want the edge of the circle to hit the edge of the counter. The other two edges should meet or overlap in the middle.
If you are not sure what it is I am describing take a look at the link below and view the diagrams along with the explanation.
Pendant Lighting Layout - How To
No comments:
Post a Comment